Polymer Flat-Faced Forward Set Trigger Kit for Polymer Frame M&P M2.0

Description

Living on the Florida coast means dealing with humidity, salt air, and sand. Your everyday carry pistol needs to perform flawlessly despite the environment, and your trigger system is the single most important interface between you and your firearm. The Polymer Flat-Faced Forward Set Trigger Kit for Polymer Frame M&P M2.0 is engineered to give you a measurable performance edge without sacrificing the corrosion resistance your gun needs to survive the coastal climate.

This kit directly replaces your factory trigger components with a drop-in design that requires no fitting or gunsmithing. You install it in minutes, and it works with your existing frame and slide. The flat-faced trigger shoe provides a consistent finger placement every time, which translates to repeatable shot placement under stress—whether you’re on the range or dealing with a real-world threat.

Real performance numbers you can feel:

• Reduces trigger pull weight by approximately 2 pounds, giving you a cleaner break without going too light for daily carry.
• Decreases overall trigger travel by roughly 40%, meaning less wasted motion between your first and second shot.
• Shortens pre-travel, over-travel, and reset distance for a faster, more controlled shooting cycle.
• Smooth uptake and a crisp, predictable break—no gritty stacking or surprise wall.
• Center-mounted pivoting safety maintains factory safety values, so your gun remains drop-safe and reliable.

The kit uses a combination of Apex springs and your factory springs, allowing you to tune the pull weight to your preference. Set it up for a duty or carry weight that still feels responsive, or dial it down for competition use. Either way, you get the same core upgrades found in the full Forward Set Trigger Kit for M&P M2.0, but in a budget-friendly package that leaves room in your wallet for ammo or holster upgrades.

Fitment and compatibility: Designed specifically for polymer frame Smith & Wesson M&P M2.0 pistols. This kit will not fit metal frame M&Ps, original M&P 1.0 models, or non-M&P platforms. If you carry an M2.0 in a coastal environment, this trigger kit is your solution for a more consistent, faster reset that keeps you on target through salt spray and sand.

Every component is finished to resist corrosion, so you can trust this trigger to perform after months of concealed carry in Florida humidity. No special tools, no frame modification, no guesswork. Just a direct drop-in upgrade that gives you a smoother, shorter trigger pull and a reset you can feel click back into place.

Price: $110
Category: Smith Wesson, Pistols