Flat-Faced Forward Set Trigger Kit for Aluminum Frame M&P M2.0

Description

For Smith & Wesson M&P M2.0 owners with an aluminum frame pistol, this Flat-Faced Forward Set Trigger Kit delivers a measurable upgrade in control and speed. Designed specifically for the coastal environment, the corrosion-resistant finish on this kit stands up to humidity, salt air, and daily carry sweat without degrading performance. Priced at $180, this is a direct drop-in replacement that requires no fitting or gunsmithing — just remove your factory trigger assembly and install this one.

The core benefit here is a shorter, more predictable trigger stroke. By reducing overall trigger travel by approximately 40%, you get a faster reset and less wasted motion between shots. Pre-travel, over-travel, and reset distance are all shortened. The uptake is smooth, the break is crisp, and the reset is tactile and audible. This translates to tighter groups and faster follow-up shots, whether you are on a training range or carrying for personal protection.

Trigger pull weight drops by roughly 2 lbs from factory spec. Using the included Apex springs combined with your factory sear and trigger return springs, you can fine-tune the pull weight to suit your needs — from a duty or carry weight up to a lighter competition feel. The patented Forward Set design repositions the trigger shoe so your finger makes contact earlier in the stroke, reducing the reach and improving leverage. This is especially noticeable for shooters with shorter fingers or those who prefer a more intuitive finger placement.

Type 3 Trigger Design
This kit uses the Type 3 trigger shoe. It features chamfered front corners (instead of the classic radius) for a slightly narrower feel without changing the internal geometry. Additional decorative face cuts on the visible sides give it a distinct look. Performance is identical to the classic Apex trigger — the difference is purely aesthetic.

Important Fitment Notes

• This kit is certified for use with aluminum frame M&P M2.0 pistols only. Do not install in steel frame models.
• Apex has steel frame models on order for drop testing. If the kit passes, they will certify it for steel frames. Until then, use only in aluminum frames.
• The over-travel stop has been removed from metal frame M&P M2.0 pistols as of June 2025. This does not affect function or safety — the forward set design still reduces over-travel compared to factory.
• Drop tested and certified safe according to Apex’s Drop Test Protocol for all specified M&P M2.0 configurations.
• Center mounted pivoting safety maintains factory safety values. No compromise on reliability.

What You Get

• Flat-faced forward set trigger shoe (Type